Magnepan CC5 User Manual download pdf (Page 2)

6. Installation and Placement

The CC5 can be mounted in or on a cabinet or on credenza or shelf. The CC5 is a "small" speaker. Like all

Magneplanars, the CC5 is a dipole speaker. We recommend 12 inches clearance, measuring from the back of the

CC5 to the surface behind the CC5.

Wall Mounting-- Two vertical wood supports on the back of the speaker allows the CC5 to be mounted on the wall

(typically below a video monitor) utilizing a small omni-mount cantilever. Install with four 10x3/4 inch wood screws.

When in operation, the CC5 should be extended from the wall to the maximum distance.

For installations that require custom mounting of the CC5, 1/4"-20 T-nuts are built into the bottom of the CC5 that can

be utilized for different installation requirements. A diagram of the T-nut placement is shown below.

7. Phasing

Correct phasing between the tweeter and midrange is accomplished when the speaker is angled relative to the

listener as shown below. Correct phasing between the midrange of the CC5 and the bass augmentation provided by

the left/right Maggies is described in the Bass Management and Processor Settings below.

1 2 3 4 5

No comments

Magnepan CC5 User Manual Page 2